How to Install Bathroom Wall Panels: A Step-by-Step Guide

Bathroom wall panels are an increasingly popular alternative to traditional tiles or paint. They are easy to install, durable, and can be a great way to update the look of your bathroom. If you’re considering installing bathroom wall panels, we’ve got you covered. In this article, we’ll walk you through the process of installing bathroom wall panels using the brands of panels that our company supplies: Multipanel, Wetwall, and Showerwall.

Preparation

Before you begin installing bathroom wall panels, there are a few things you need to do to prepare.

1. Measure the bathroom walls to determine how many panels are needed. This will help you estimate the cost and ensure that you have enough panels to cover the entire wall.
2. Clean the walls and remove any old adhesive or sealant. Use a scraper or putty knife to remove any loose material, and then wipe the walls down with a damp cloth.
3. Gather the necessary tools and materials. You will need a notched trowel, adhesive, silicone sealant, a saw (if you need to cut panels to size), and a level.

Installation

Once you have prepared the walls and gathered your tools and materials, you’re ready to begin installing the bathroom wall panels.

1. Start with the corner or edge of the wall. Apply adhesive to the back of the panel using a notched trowel, making sure to spread it evenly.
2. Press the panel firmly against the wall, making sure it is level and plumb. You can use a level to check that the panel is straight.
3. Repeat the process with the remaining panels, cutting them to size if necessary. Be sure to leave a small gap between each panel to allow for expansion and contraction.
4. Install any necessary trim pieces or corner joints. These will help cover any gaps between the panels and create a finished look.

Finishing

After you have installed the bathroom wall panels, there are a few finishing touches you need to make.

1. Apply silicone sealant around the edges of the panels and where they meet the bath or shower tray. This will help prevent water from getting behind the panels and causing damage.
2. Clean up any excess adhesive or sealant. Use a damp cloth to wipe away any excess, taking care not to smear it onto the panels.
3. Allow the panels to dry and cure before using the bathroom. This can take up to 24 hours, depending on the type of adhesive used.

Maintenance

To keep your bathroom wall panels looking new, it’s important to clean and maintain them regularly.

1. Use a soft cloth or sponge to wipe down the panels with warm soapy water. Avoid using abrasive cleaners or scrubbers, as these can damage the surface of the panels.
2. Rinse the panels with clean water and wipe them dry with a soft cloth.
3. If you notice any stains or discoloration, you can use a mild bleach solution to clean the panels. Be sure to follow the manufacturer’s instructions and rinse the panels thoroughly afterwards.

Conclusion

Installing bathroom wall panels is a great way to update the look of your bathroom. With the brands of panels that our company supplies, Multipanel, Wetwall, and Showerwall, the process is easy and straightforward. By following the steps outlined in this article, you can have your new bathroom wall panels installed in no time. If you have any questions or need assistance, don’t hesitate to contact our team.